PRODUCT
SDS

MSDS of Tantalum

1 PRODUCT AND SUPPLIER IDENTIFICATION
Product Name: Tantalum - pellets, wire, rod, foil, sheet, target, fasteners
Formula: Ta
Supplier: Stanford Advanced Materials
23661 Birtcher Dr., Lake Forest, CA 92630 U.S.A.
Telephone: (949) 407-8904
Fax: (949) 812-6690
Email: sales@SAMaterials.com
Recommended Uses: Scientific Research

2 HAZARDS IDENTIFICATION
GHS Classification (29 CFR 1910.1200): Not classified as hazardous
GHS Label Elements:
Signal Word: N/A
Hazard Statements: N/A
Precautionary Statements: N/A

3 COMPOSITION/INFORMATION ON INGREDIENTS
Ingredient: Tantalum
CAS#:       7440-25-7

4 FIRST AID MEASURES
General Measures: Under normal handling and use, exposure to solid forms of this material presents few health hazards. Subsequent operations such as grinding, melting, or welding may produce potentially hazardous dust or fumes that can be inhaled or come in contact with the skin or eyes.
INHALATION: Remove to fresh air, keep warm and quiet, and give oxygen if breathing is difficult. Seek medical attention.
INGESTION: Rinse mouth with water. Do not induce vomiting. Seek medical attention. Never induce vomiting or give anything by mouth to an unconscious person.
SKIN: Remove contaminated clothing, brush material off the skin, and wash the affected area with soap and water. Seek medical attention if symptoms develop or persist.
EYES: Flush eyes with lukewarm water, including under upper and lower eyelids, for at least 15 minutes. Seek medical attention if symptoms develop or persist.

Most Important Symptoms/Effects, Acute and Delayed: May cause irritation. See section 11 for more information.
Indication of Immediate Medical Attention and Special Treatment: No other relevant information is available.

5 FIREFIGHTING MEASURES
Extinguishing Media: Use a suitable extinguishing agent for surrounding materials and type of fire.
Unsuitable Extinguishing Media: No information available
Specific Hazards Arising from the Material: This product does not present fire or explosion hazards as shipped. Fine turnings and dust from processing may be ignitable. May emit toxic metal oxide fumes under fire conditions.
Special Protective Equipment and Precautions for Firefighters: Full face, self-contained breathing apparatus, and full protective clothing when necessary.

6 ACCIDENTAL RELEASE MEASURES
Personal Precautions, Protective Equipment, and Emergency Procedures: Wear appropriate respiratory and protective equipment specified in section 8. Avoid dust formation.
Methods and Materials for Containment and Cleaning Up: Sweep or scoop up. Place in appropriate waste disposal container.
Environmental Precautions: Do not allow it to be released into the environment.

7 HANDLING AND STORAGE
Precautions for Safe Handling: Avoid creating dust. Provide adequate ventilation if dust is created. Avoid breathing dust or fumes. Avoid contact with skin and eyes. Wash thoroughly before eating or smoking. See section 8 for information on personal protection equipment.
Conditions for Safe Storage: Store in a cool, dry area. See section 10 for more information on incompatible materials.

8 EXPOSURE CONTROLS AND PERSONAL PROTECTION
Exposure Limits: Tantalum
OSHA/PEL: 5 mg/m3
ACGIH/TLV: 5 mg/m3
Engineering Controls: Ensure adequate ventilation to maintain exposures below occupational limits. Whenever possible the use of local exhaust ventilation or other engineering controls is the preferred method of controlling exposure to airborne dust and fume to meet established occupational exposure limits. Use good housekeeping and sanitation practices. Do not allow dust to accumulate as it may present a fire hazard. Do not use tobacco or food in the work area. Wash thoroughly before eating or smoking. Do not blow dust off clothing or skin with compressed air.
Respiratory Protection: If permissible levels are exceeded, use NIOSH approved dust respirator.
Eye Protection: Safety glasses
Skin Protection: Wear impermeable gloves, and protective work clothing as necessary.

9 PHYSICAL AND CHEMICAL PROPERTIES
Appearance:
Form: Solid in various forms
Color: Bluish gray to silver metallic
Odor: Odorless
Odor Threshold: Not determined
pH: N/A
Melting Point: 2996 oC
Boiling Point: 5425±100 oC
Flash Point: N/A
Evaporation Rate: N/A
Flammability: N/A
Upper Flammable Limit: No data
Lower Flammable Limit: No data
Vapor Pressure: No data
Vapor Density: N/A
Relative Density (Specific Gravity): 16.6 g/cc @ 20 oC
Solubility in H2O: Insoluble
Partition Coefficient (n-octanol/water): Not determined
Autoignition Temperature: No data
Decomposition Temperature: No data
Viscosity: N/A

10 STABILITY AND REACTIVITY
Reactivity: No data
Chemical Stability: Stable under recommended storage conditions.
Possibility of Hazardous Reactions: Tantalum fines or dust will burn when exposed to an ignition source.
Conditions to Avoid: Avoid creating or accumulating fines or dust.
Incompatible Materials: Acids, oxidizing agents, halogens, bromine trifluoride, fluorine, lead chromate, sulfur trioxide.
Hazardous Decomposition Products: Tantalum oxide fume.

11 TOXICOLOGICAL INFORMATION
Likely Routes of Exposure: Inhalation, skin, eyes. The product as shipped does not present an inhalation hazard; however subsequent operations may create dusts or fumes which could be inhaled.
Symptoms of Exposure: May cause irritation if dusts or fumes are inhaled or swallowed. Fines/dusts may irritate skin and eyes.
Acute and Chronic Effects: Tantalum metal is generally considered to be physiologically inert.
Acute Toxicity: No data
Carcinogenicity: NTP: Not identified as carcinogenic IARC: Not identified as carcinogenic
To the best of our knowledge the chemical, physical, and toxicological characteristics of the substance are not fully known.

12 ECOLOGICAL INFORMATION
Ecotoxicity: No data
Persistence and Degradability: No data
Bioaccumulative Potential: No data
Mobility in Soil: No data
Other Adverse Effects: Do not allow material to be released into the environment without proper governmental permits. No further relevant information is available.

13 DISPOSAL CONSIDERATIONS
Waste Disposal Method:
Product: Dispose of in accordance with Federal, State, and Local regulations.
Packaging: Dispose of in accordance with Federal, State, and Local regulations.

14 TRANSPORT INFORMATION
DOT/ADR/IATA/IMDG Regulations: Not regulated
UN Number: N/A
UN Proper Shipping Name: N/A
Transport Hazard Class: N/A
Packing Group: N/A
Marine Pollutant: No
Special Precautions: N/A

15 REGULATORY INFORMATION
TSCA Listed: All components are listed.
Regulation (EC) No 1272/2008 (CLP): N/A
Canada WHMIS Classification (CPR, SOR/88-66): N/A
HMIS Ratings: Health: 0 Flammability: 0 Physical: 0
NFPA Ratings: Health: 0 Flammability: 0 Reactivity: 0
Chemical Safety Assessment: A chemical safety assessment has not been carried out.

16 OTHER INFORMATION
The above information is believed to be correct, but does not purport to be all-inclusive and shall be used only as a guide. Stanford Advanced Materials shall not be held liable for any damages resulting from handling or contact with the above product.

About the author

Chin Trento

Chin Trento holds a bachelor’s degree in applied chemistry from the University of Illinois. His educational background gives him a broad base from which to approach many topics. He has been working with writing advanced materials for over four years in Stanford Advanced Materials (SAM). His main purpose in writing these articles is to provide a free, yet quality resource for readers. He welcomes feedback on typos, errors, or differences in opinion that readers come across.

REVIEWS
{{viewsNumber}} Thought On "{{blogTitle}}"
{{item.created_at}}

{{item.content}}

LEVE A REPLY (Cancle reply)

Your email address will not be published. Required fields are marked*

Comment
Name*
Email*
{{item.children[0].created_at}}

{{item.children[0].content}}

{{item.created_at}}

{{item.content}}

More Replies

LEAVE A REPLY

Your email address will not be published. Required fields are marked*

Comment
Name*
Email*

Related News & Articles

MORE >>
SAM logo
MSDS of Indium Metal

Stanford Advanced Materials provides high quality indium metal with material safety data sheet for your reference.

READ MORE >
Material Safety Data Sheet of Lanthanum Oxide

Stanford Advanced Materials (SAM) offers high quality lanthanum oxide with materials safety data sheet for your reference.

READ MORE >
MSDS of Tungsten Hexafluoride
MSDS of Tungsten Hexafluoride

MSDS (Material Safety Data Sheet) of Tungsten Hexafluoride is provided for your reference here.

READ MORE >
Leave A Message
Leave a Message
*Your Name:
*E-mail:
*Product name:
*Your Phone:
*Message: