1200C Max. Muffle Furnace Chamber for Debinding KSL1200X-M-F Description
1200C Max. Muffle Furnace Chamber for Debinding is a muffle furnace with a 314 alloy chamber and a working temperature of 1100℃. The furnace body and power box of the furnace are designed separately, and the heating part can be easily placed in the fume hood. This equipment can be used for annealing, sintering, fine debinding, degreasing, corrosion, and pollution control in the material sintering process of various ceramics, porous materials, 3D printing, and other fields.
1200C Max. Muffle Furnace Chamber for Debinding KSL1200X-M-F Specifications
|
Heating Chamber
|
- Size: 12" x 12" x 12" (300 x 300 x 300 mm)
- Capacity: 27 liters
- Heating element: Ni-Cr-Al wire inserted a high purity fibrous alumina
- Three sides heating
- Max. Temperature: 1200 ℃
|
|
Refractory Alloy Chamber
|
- Size: 230 x 230 x 250 mm
- Max. working Temperature: 1000℃
- 314 alloy chamber
- Capacity: (~13.2 Liter)
- 8 mm ID gas inlet tube is put to the back of the furnace
- 8 mm ID" gas outlet tube is connected to the top of the furnace
- K type thermal couple is inserted into the inside chamber for temperature control
|
|
Power
|
- 208~240V AC, Single phase, 50/60 Hz
- 7.5KW
- Note: Power cable included, but without the plug. Please install a plug on your own
|
|
Max Operating Temperature
|
- 1000℃ with refractory alloy chamber inside
- 1200℃ without refractory alloy chamber inside
- Temperature Stability: ±1℃
- Suggested heating Rate: 10 ℃/min
|
|
Temperature Controller
|
- The FA-YD518P-AG temperature controller is included.
- Proportional–integral–derivative control (PID control) and auto-tune function
- 30 segments programmed with ramping, cooling, and dwelling steps
- Built-in over-temperature alarm and thermocouple failure alarm
- +/- 1℃ temperature control accuracy
- Default DB9 PC communication port with PC operation software included
- Eurotherm temperature controller with +/- 0.1 accuracies is available at the extra cost
|
|
Net Weight
|
200 Kg
|
|
Warranty
|
- One-year limited warranty with lifetime support.
- ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of SAM One Year Limited Warranty.
|
|
Compliance
|
- CE Certified
- NRTL (UL61010) or CSA certification is available upon request at an extra cost.
|
1200C Max. Muffle Furnace Chamber for Debinding KSL1200X-M-F Applications
1200C Max. Muffle Furnace Chamber for Debinding can remove bender or glue to prepare porous materials or fill inert gas for sintering oxygen-sensitive materials.
1200C Max. Muffle Furnace Chamber for Debinding KSL1200X-M-F Packaging
Our 1200C Max. Muffle Furnace Chamber for Debinding KSL1200X-M-F is carefully handled during storage and transportation to preserve the quality of our product in its original condition.
