Description of Monel 400 Bar/Rod
Monel 400 is a ductile nickel-copper alloy that is hardened by cold working.
This alloy shows properties such as good corrosion resistance, good weldability, and high strength. It also has excellent mechanical properties at subzero temperatures and can be used in up to 538°C. It is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated.
Monel 400 has a low corrosion rate in flowing seawater, which makes it is widely used in marine applications.
Specifications of Monel 400 Bar/Rod
Density
|
8.80 g/cm3
|
Specific heat
|
427 J/kg-°K (20°C)
|
Modulus of Elasticity
|
182 GPa (20°C)
|
Thermal Conductivity
|
22.0 W/m-°K (20°C)
|
Melting range
|
1300 – 1350°C
|
Electrical resistivity
|
0.511 Microhm-cm at 21°C
|
Chemical Analysis (%)
|
Ni (plus Co)
|
63.0 min.-70.0 max.
|
Cu
|
28.0 min.-34.0 max.
|
C
|
0.3
|
Mn
|
2
|
Fe
|
2.5
|
S
|
0.024
|
Si
|
0.5
|
Standards of Monel 400 Bar/Rod
Plate, Sheet, and Strip
|
Bar, Rod, Wire, and Forgings
|
Pipe & Tube
|
BS3072NA13 BS3073NA13 ASTM B 127 ASME SB 127 SAE AMS 4544 DIN 17750 QQ-N-28
|
BS3075NA13 BS3076NA13 ASTM B 164 ASTM B 564 ASME SB 164 ASME SB 564 AECMA PrEN 2305 SAE AMS 4675 SAE AMS 4730 SAE AMS 4731 DIN 17752 DIN 17753 DIN 17754 VdTÜV 263 QQ-N-28
|
BS3074NA13 ASTM B 163 ASTM B 165 ASTM B 725 ASTM B 730 ASTM B 751 ASTM B 775 ASTM B 829 ASME SB 163 ASME SB 165 ASME SB 725 ASME SB 730 ASME SB 751 ASME SB 775 ASME SB 829 SAE AMS 4574 DIN 1775 VdTÜV 263
|
Applications of Monel 400 Bar/Rod
- Industrial heat exchangers
- Marine engineering
- Boiler food water heater
- Chlorinated solvents
- Chemical and hydrocarbon processing equipment
- Marine engineering
- Crude petroleum stills
- De-aerating heaters
- Gasoline & freshwater tanks
- Chemical & hydrocarbon processing equipment