Titanium 6Al-2Sn-4Zr-2Mo – Titanium 6-2-4-2
Titanium 6Al-6V-2Sn is an Alpha Beta two-phase alloy. It is often used in aged, annealed, or solution treated conditions. It’s a high strength heat treatable alloy with lower ductility and toughness than Titanium Grade 5 (6Al-4V) and it’s difficult to weld. Cold forming of Titanium 6Al-6V-2Sn is difficult due to its large amount of spring-back and high strength. This grade of titanium can be welded by the inert gas but the heat-affected area will have less toughness and ductility than the parent material. The hardness of Titanium 6-6-2 is roughly Rockwell C 36-38. This grade of titanium is mainly used for rocket engine cases, airframe and jet engine parts, and ordinance components. Please make a call to us to determine our minimum item quantity.
Airframe Components, Ordinance Components, Jet Engine Parts, Rocket Engine Cases
MIL-T-9047, AMS 4981
Bar, Sheet, Wire, Plate, Fittings, Forgings, Seamless Pipe,Flanges, Seamless Tube, Welded Tube, Welded Pipe
Titanium 6Al-2Sn-4Zr-6Mo – Titanium 6-2-4-6
Titanium 6Al-2Sn-4Zr-6Mo is an Alpha-Beta Alloy. It’s usually considered the workhorse alloy of the titanium industry. The alloy is fully heat-treatable in section whose size is up to one inch and is used up to approximately 400°C (750°F). Due to the fact that it is one of the most commonly used alloys (over 70% of all melted alloy grades are a sub-grade of Ti-6-4,) its use spans many airframe components and aerospace engine. Titanium 6Al-2Sn-4Zr-6Mo is also applied in many non-aerospace occasions, such as offshore, marine, and power generation industries. This Alpha-Beta alloy combines good strength and corrosion resistance with fabricability and weldability. The alloy is usually available in the form of bar and it’s generally used in deep sour well. This kind of alloy can be cold or hot formed. Please make a call to us to determine our minimum item quantity.
Aerospace Engines, Marine Applications, Airframe Components, Power Generation Applications, Offshore Applications
Bar, Sheet , Plate
Titanium 8Al-1Mo-1V – Titanium 8-1-1
Titanium 8Al-1Mo-1V is a near Alpha alloy that was mainly designed for use in elevated temperatures – up to 455 degrees Celsius. It has the lowest density and highest modulus among all titanium alloys. It has excellent creep strength and is weldable by resistance-welding and inert gas fusion. Titanium 8Al-1Mo-1V is used in annealed condition for such jet engine parts and airframe that require superior creep resistance, high strength, and very good stiffness-to-density ratio. The machinability of this grade is similar to that of Titanium 6Al-4V. Please make a call to us to determine our minimum item quantity.
Jet Engine Parts, Airframe Parts
MIL-T-9046, AMS 4972, MIL-T-9047, AMS 4973, AMS 4915, AMS 4916, AMS 4955
Forgings, Sheet , Bar, Strip, Plate, Wire, Extrusions
Titanium 10V-2Fe-3Al is a Titanium Beta alloy. It is harder and stronger than many other titanium alloys. This type of titanium is a heat-treatable alloy. It’s weldable and is easily formed. Titanium 10V-2Fe-3Al is an all Beta alloy and is harder to machine than most other titanium alloys. The main problems include spring-back, flank wear, and chip control. Due to these characteristics, positive rake chip grooves combined with light hones on the cutting edge have an advantage. Please make a call to us to determine our minimum item quantity.
Airframe Components, Disks, Wheels and Spacers, Compressor Blades
AMS 4983, AMS 4986, AMS 4987, AMS 4984
Bar, Plate , Forgings, Sheet, Seamless Tube, Seamless Pipe, Wire, Welded Pipe, Welded Tube
This Metastable-Beta alloy is mainly used in the form of sheet metal. It is highly cold-formable and age-hardenable. Titanium 15V-3-3-3 is often used for the replacement of hot-formed Titanium Grade 5 (6Al-4V) sheet. It can also be used as foil and is a very good alloy for castings. For application in aerospace, this grade of titanium is often specified as AMS 4914. Please make a call to us to determine the minimum item quantity.
Aerospace Tank Applications, Castings, Airframe Applications, High Strength Hydraulic Tubing , Fasteners
ASTM B265, AMS 4914
Titanium Alpha Alloys
Commercially pure titanium and alpha alloys of titanium are non-heat-treatable and have excellent welding properties.
Cryogenic applications, Chemical processing equipment, Airplane parts
AMS 4973, AMS 4924, AMS 4976, MIL-T-9047, AMS 4972, GR-6 MIL-T9046, AMS 4910, AMS 4909, ASTM B265, AMS 4966, AMS 4915/4916, AMS 4966, AMS 4924, MIL-T-81556A A-1, AMS 4933, MIL-T-81556A A-4, MIL-T-81556A A-2
Bar, Plate, Forgings, Sheet Extrusions
Titanium Beta Alloys
Titanium Beta or near Beta alloys are completely heat treatable and generally weldable. It has high strength and good creep resistance at intermediate temperatures.
In solution treated condition, Beta alloys can have excellent formability.
Titanium Beta alloys are ideal for sporing. Commonly seen Titanium Beta Alloys include:
Ti3Al8V6Cr4Mo4Zr, Ti-3Al-8V-6Cr-4Mo-4Zr, ASTM Grade 19, ASTM Grade 21, AMS 4983, 4984 and 4987, Ti-15Mo-3Nb-3Al-2Si, Ti-15Mo-3Nb-3Al-2Si, Ti-10V-2Fe-3Al, AMS 4914
The Metastable Titanium Beta alloys are heat-treatable by aging and solution treatment. Completely stable beta alloys can only be annealed.
ASTM Grade 19, AMS 4914, ASTM Grade 21, AMS 4984, AMS 4983, AMS 4987
Titanium Alpha-Beta Alloys
Titanium Alpha Beta alloys are heat-treatable. Most of them are also weldable. The typical characteristics of Titanium Alpha Beta alloys are: medium to high strength; high temperature creep strength is not lower than most other alpha alloys; limited quality of cold forming while the quality of hot forming is normally very good.
The most frequently used Titanium Alpha Beta alloy is Ti 6Al-4V. Titanium 6Al-4V has been developed in many variations for a number of different applications.
Other Titanium Alpha Beta alloys include: 6Al-4V-ELI, 6Al-2Sn-4Zr-2Mo , 6Al-6V-2Sn, 3Al-2.5V 8Mn
Aircraft and aircraft turbine parts, Prosthetic devices, Marine hardware, Chemical processing equipment
ASME SB-265, ASME SB-348, AMS 4911, AMS 4965, AMS 4928, MIL-T-9047, AMS 4967, AMS 4930, AMS 4981, AMS 4930, MIL-T-9046, AMS 4971, AMS 4918, ASTM F 136, AMS 4908, DMS1879/2237, ASTM B348, AMS 4943, MIL-T-9047 G, BMS 7-348, AMS 4975, AMS 4928, AMS 4976, DMS 1570, AMS 4934, AMS 4920
Bar, Flanges, Fittings, Flanges, Forgings, Sheet, Plate, Wire, Tube