SECTION 1. IDENTIFICATION
Product Name: Silver Chloride
CAS #: 7783-90-6
Relevant identified uses of the substance: Scientific research and development
Supplier details:
Stanford Advanced Materials
E-mail: sales@samaterials.com
Tel: (949) 407-8904
Address: 23661 Birtcher Dr., Lake Forest, CA 92630 U.S.A.
SECTION 2. HAZARDS IDENTIFICATION
Harmful by ingestion, inhalation and skin contact. Prolonged exposure may result in argyria, a bluish
discolouration of the skin. Irritating to eyes and may irritate skin.
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
COMPONENT NAME CAS No. % CLASS HEALTH RISK UN No.
Silver Chloride 7783-90-6 100% N.R. N.R. 22/24-25 -
SECTION 4. FIRST AID MEASURES
GENERAL: Consult a Physician for specific advice
EYES: Irrigate thoroughly with water for at least 10 minutes. Obtain medical attention.
SKIN: Wash off thoroughly with water. Remove contaminated clothing and wash before re-use. In
severe cases obtain medical attention.
INHALATION: Remove from exposure, rest and keep warm. In severe cases seek medical attention.
INGESTION: Wash out mouth thoroughly with water and give plenty to drink. Obtain medical attention.
SECTION 5. FIREFIGHTING MEASURES
FLASH POINT: Not Ignitable. Not Applicable
UNUSUAL FIRE HAZARDS: May evolve toxic fumes in a fire.
SECTION 6. ACCIDENTAL RELEASE MEASURES
CONTAMINATION CLEANUP: Wear suitable protective clothing & equipment as listed under
Exposure / Personal protection. Mix with sand, transfer carefully to
container and arrange removal by disposal company. Wash site of spillage thoroughly with water and
detergent. For large spillages liquids should be contained with
sand or earth and both liquids and solids transferred to salvage containers. Any residues should be
treated as for small spillages.
SECTION 7. HANDLING AND STORAGE
USAGE PRECAUTIONS: Wash hands and face thoroughly after working with material. Protect from
light.
STORAGE PRECAUTIONS: Store at room temperature (15 to 25oC recommended). Keep well closed
and protected from direct sunlight and moisture.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Protective gloves made of polyvinyl alcohol (PVA) are required. Use of a laboratory coat is suggested.
Safety goggles or safety glasses with side shields are required if
there is any possibility of chipping or dust creation. Respirators must be worn when the threshold limit
is exceeded. Provide adequate general mechanical ventilation, and
local exhaust ventilation. When handling quantities of this material, be sure to wear appropriate
protective equipment as described. Eye wash should be readily available.
Wash thoroughly after handling. Do not take internally. Avoid breathing dust when generated. For
persons with sensitive existing medical conditions, medical advice
should be sought before employing on tasks involving exposure to this material.
EXPOSURE LIMITS: OES Silver Compounds 0.01mg/m3 (Long term, 8 hour TWA)
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE : Clear white/grey crystals or powder
pH IN AQUEOUS SOLUTION: No data available
BOILING POINT (760mm Hg) 1550oC
MELTING POINT: 457°C
FLASH POINT: Not Applicable
FLAMMABILITY: Not Applicable
EXPLOSIVE PROPERTIES: Not Applicable
SPECIFIC GRAVITY: 5.59
Vapor PRESSURE: Not Applicable
SOLUBILITY IN WATER: 52 x 10-6 g/100g water
SECTION 10. STABILITY: Darkens on exposure to light
HAZARDOUS DECOMPOSITION: May evolve toxic fumes in fire
MATERIALS TO AVOID: Aluminum, Ammonia, Alkali metals, Peroxy compounds,
Sulpoxides.STABILITY AND REACTIVITY
SECTION 11. TOXICOLOGICAL INFORMATION
TOXIC DOSE - LD50 >10g/kg oral, mouse
CARCINOGENICITY No evidence of carcinogenic properties.
MUTAGENICITY/TERATOGENICITY No evidence of mutagenic or teratogenic effects.
TOXICOLOGICAL FINDINGS Harmful by ingestion, inhalation and skin contact. Prolonged exposure
may result in argyria, a bluish discolouration of the
skin. Irritating to eyes and may irritate skin
SECTION 12. ECOLOGICAL INFORMATION
The following applies to silver compounds in general: biological effects: silver ions toxic for aquatic
organisms; bacteria: Ps. putida toxic from 0.006 mg/l up; protozoa:
U. parduczi toxic from 0.1 mg/l up; arthropods: D. daphnia LC50: 0.5 mg/l; algae: M. aeruginosa toxic
from 0.0007 mg/l up; Sc. quadricauda toxic from 0.009 mg/l up
Due to the poor solubility of the product, no harmful effects on aquatic organisms are to be expected
when the product is handled and used with due care and attention.
SECTION 13. DISPOSAL CONSIDERATIONS
DISPOSAL METHODS: Chemical residues are generally classified as special waste, and as such are
covered by regulations which vary according to location.
Contact your local waste disposal authority for advice, or pass to a chemical disposal company.
SECTION 14. TRANSPORT INFORMATION
Not subject to transport regulations
SECTION 15. REGULATORY INFORMATION
CLASSIFICATION: Not classified as dangerous according to EC Directives. EC-No.: 232-033-3
LABEL FOR SUPPLY: None
RISK PHRASES: R22 Harmful if swallowed.
SAFETY PHRASES: S24/25 Avoid contact with skin and eyes.
SECTION 16. OTHER INFORMATION
Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is
believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The
information in this document is based on the present state of our knowledge and is applicable to the
product with regard to appropriate safety precautions. It does not represent any guarantee of the
properties of the product.
Converters & Calculators
GHS09
imide.jpeg "Silver Bis(trifluoromethanesulfonyl)imide")