Categories By Element

Categories By Function

MSDS of Neodymium Metal

I. Product Identification

Product primary name: Neodymium Metal Ingot
Trade name: Neodymium Metal Ingot
Stock number: ME60
Supplier:
Stanford Advanced Materials
72 Fairbanks Suite 100, Irvine, CA 92618, USA
Tel: (949) 407-8904, Fax: (949) 812-6690
E-mail: sales@SAMaterials.com
CAS# 7440-0033-8
Dot: not classified as a hazard
UN# : not classified as a hazard

II. Composition & Ingredient Information

Chemical family name: metal
Molecular formula: Nd

III. Physical & Chemical Properties

Boiling point: ~3027 °C
Melting point: ~1024 °C
Specific gravity (approx.): 7.00 gm/cm3
Vapor density: not applicable
Vapor pressure: not applicable
Percent volatile by volume: not applicable
Oxidation: oxidized in air, solid form is relatively stable in air
Appearance & odor: silvery- metal, odorless
Physical state: ingot

IV. Hazardous Identification

Primary Entry Route Indicators
Skin primary entry route indicator: Yes
Eye primary entry rout indicator: Yes
Inhalation primary entry route indicator: Yes
Ingestion primary entry route indicator: Yes
Primary route of entry text: inhalation, skin, ingestion
Effects of overexposure: the acute toxicity of is rate low
(Lung & skin granulation maybe cause local inhalation or ingestion. Eye contact can cause particle irritation.

V. First Aid Measures

Emergency first aid procedures - general
Skin: get medical attention immediately
Eyes: get medical attention immediately
Oral: get medical attention
Inhalation: get medical attention

VI. Fire - fighting Measures

Extinguishing media: CO2, dry sand, or dry chemical
Special fire fighting procedures: wear self - contained breathing apparatus
Unusual fire and explosion hazards: non-combustible, but easily oxidized. Sparks when strick. If possible without risk, remove yttrium metal from fire area.

VII. Handling and Storage

Precautions to be taken in handling and storage:. Avoid inhalation of dust, avoid skin & eyes contact, avoid exposure to air, stored in sealed container filled with argon gas or mineral oil.

VIII. Exposure Controls - protection

Eye protection: safety glasses
Respiratory protection: niosh approved respirator if ventilation controls are not possible or are inadequate
Personal protective equipment: as needed to prevent contact
Protective gloves (specify type): rubber

IX. Stability & Reactivity

Stability - conditions to avoid: avoid exposure to source of ignition such as open flame and sparks
Incompatible materials: avoid exposure to air, moisture, strong acid, and strong oxidizing agents
Hazardous decomposition products: air and moisture sensitive, all forms will react with dilute acids, emitting flammable & explosive hydrogen gas (H2)
Hazardous polymerization condition to avoid: non known
Hazardous polymerization: no

X. Other Information

Local exhaust: fume hood
Special production: not applicable

End of Data Sheet

This material safety data sheet is offered solely for your information, consideration, and investigation. Stanford Advanced Materials provides no warranties, either express or implied, and assumes no responsibility for the accuracy or completeness of the data contained herein.

Keywords: material safety data sheet,msds,neodymium metal


Follow Us On