MSDS of Neodymium Oxide

1. Product Identification
Product details:
Trade name: Neodymium Oxide
CAS# 1313-97-9
Stanford Advanced Materials
72 Fairbanks, Suite 100, Irvine, CA 92618, USA
Tel: (949) 407-8904 Fax: (949) 812-6690

2. Composition & Ingredient Information
Chemical family name: oxide
Molecular formula: Nd2O3
Threshold limit value: not established

3. Hazardous Identification
Primary entry route indicators
Skin primary entry route indicator: Yes
Eye primary entry rout indicator: Yes
Inhalation primary entry route indicator: Yes
Ingestion primary entry route indicator: Yes
Primary route of entry text: inhalation, skin, ingestion
Effects of overexposure: the acute toxicity of neodymium oxide powders is rate low (lung & skin granulation maybe cause local inhalation or ingestion. Eye contact can cause particle irritation.

4. First Aid Measures
Emergency first aid procedures - general:
Skin: wash with soap & water;
Eyes: flush with water for 15 min.;
Oral: get medical attention;
Inhalation: get medical attention

5. Fire - Fighting Measures
Extinguishing media: CO2, water, foam or dry chemical
Special fire fighting procedures: wear self - contained breathing apparatus
Unusual fire and explosion hazards: non-combustible.

6. Handling and Storage
Precautions to be taken in handling and storage: avoid inhalation of dust, avoid skin & eyes contact

7. Exposure Controls - Protection
Eye protection: safety glasses
Respiratory protection: niosh approved respirator if ventilation controls are not possible or are inadequate
Personal protective equipment: as needed to prevent contact
Protective gloves (specify type): rubber

8. Physical & Chemical Properties
Boiling point: no data
Melting point: ~ 2272 °C
Specific gravity: 7.24 g /cm3
Vapor density: not applicable
Vapor pressure: not applicable
Percent volatile by volume: not applicable
Evaporation rate: not applicable
Solubility in water: insoluble
Appearance: light blue colored amorphous powder, odorless
Physical state: powder

9. Stability & Reactivity
Stability indicator: Yes
Stability - conditions to avoid: non known
Incompatible materials: non known
Hazardous decomposition products: non known
Hazardous polymerization - condition to avoid: non known
Hazardous polymerization indicator: no
Hazardous polymerization: no

10. Other Information
Local exhaust: fume hood
Special protection: not applicable

End of Data Sheet
This material safety data sheet is offered solely for your information, consideration, and investigation. Stanford Advanced Materials provides no warranties, either express or implied, and assumes no responsibility for the accuracy or completeness of the data contained herein.

About the author

 Previous Next 


Want More Info?

** Email address with your company's domain name is preferred. Otherwise, we may not be able to process your inquiry.




** Email address with your company's domain name is preferred. Otherwise, we may not be able to process your inquiry.

 Inquiry List