Categories By Element

Categories By Function

ALUMINUM ALLOY 5052 Foil Maximize

ALUMINUM ALLOY 5052 Foil

Catalog No.Al-5052-F
MaterialALUMINUM ALLOY 5052
StandardQQA-1876, ASTM B479
Thickness0.00018 to 0.064 in
Width0.375 to 60 in

Stanford Advanced Materials supplies our customers with high quality ALUMINUM ALLOY 5052 Foil.

More details

Aluminum Alloys 5052 and 6061 offer a wide range of design opportunities to benefit consumer electronics manufacturers. These light weight materials enable manufacturers to trim precious ounces, coupled with high strength to make smaller, thinner components feasible. While they score high marks for function, these alloys also take on an outstanding variety of end products.  

Material strength, attractive finish and anodizing are all priorities for aluminum in the electronics industry. This is where 5052 and 6061 alloy reaches their greatest benefits. They are considered the preferred choice in the market for consumer electronics casings and is also used extensively in larger electronics like notebook computers, televisions and tablets. Alternatively, when strength and mechanical performance is a priority for your product, 6061 excels in both and is a outstanding solution for handheld devices and mobile phones. 

With the greater need for fuel economy, both alloys are becoming the majority of metal used in the Automotive Industry. Combining its strength and low density, it offers a much lighter alternative than steel, which in turn lowers the weight of the vehicle and increases fuel efficiency. The new Ford F150 utilizes the 6061 almost exclusively in its body design and more manufactures are turning to these alloys in order to meet EPA regulations on fuel economy.

Specification 

Finish::

Standard Finishes

Temper:

Standard Tempers

Thickness:

0.0005 to 0.064 in

Width:

0.375 to 60 in

Stanford Advanced Materials welcomes any opportunity in Aluminum Foil, Aluminum Coil or sheet products that you may require. The specifications shown on these pages are not for design purposes. 

Chemical Properties

Aluminum (Al):

Remainder

Chromium (Cr):

0.15 to 0.35%

Copper (Cu):

0.40%

Iron (Fe):

0.40%

Magnesium (Mg):

2.2 to 2.8%

Manganese (Mn):

0.10%

Other Total:

0.15%

Silicon (Si):

0.25%

Titanium (Ti):

-

Zinc (Zn):

0.10%

 

Mechanical Properties

Elongation (Annealed): 1

25

Elongation (H12):

12

Elongation (H14):

10

Elongation (H16):

8

Elongation (H18):

7

Tensile Strength (Annealed): 2

28 x 1000 psi

Tensile Strength (H12):

33 x 1000 psi

Tensile Strength (H14):

38 x 1000 psi

Tensile Strength (H16):

40 x 1000 psi

Tensile Strength (H18):

42 x 1000 psi

Yield Strength (Annealed): 3

13 x 1000 psi

Yield Strength (H12):

28 x 1000 psi

Yield Strength (H14):

31 x 1000 psi

Yield Strength (H16):

35 x 1000 psi

Yield Strength (H18):

37 x 1000 psi

1   % in 2 inches

2   x 1000 psi

3   0.2% offset 

Product Line

Aluminum Alloy Product Line - SAM



Send us an inquiry now to find out more information and the latest prices,thanks!

Please include item quantity, size and purity.

Check code Refresh check code

Follow Us On