Categories By Element
Categories By Function
Maximize | Catalog No. | WM0147 |
|---|---|
| Size | 20-30 mesh |
| Material | WC |
| CAS Number | 12070-12-1 |
| Appearance | Gray Powder |
Stanford Advanced Materials (SAM) is a professional supplier of Tungsten Carbide Powder. We offer our products with high quality and competitive prices.
Related products: Macro Tungsten Carbide Powder, Casting Tungsten Carbide Powder, Tungsten Powder
Tungsten carbide powder can be pressed and formed into shapes for use in industrial machinery, cutting tools, abrasives, armor-piercing rounds, other tools and instruments, and jewelry.
Tungsten carbide is approximately two times stiffer than steel, with Young's modulus of approximately 530–700 GPa (77,000 to 102,000 KSI, and is double the density of steel It is comparable with corundum (α-Al2O3) in hardness and can only be polished and finished with abrasives of superior hardness such as cubic boron nitride and diamond powder, wheels, and compounds.
| Item No. | BET(m2/g) | Particle Size (μm) | Oxygen Content (%) | |
| Ultrafine tungsten carbide powder | CB74-01 | 3.8-4.77 | / | 0.50 |
| CB74-02 | 1.9-3.8 | / | 0.40 | |
| Fine tungsten carbide powder | CB74-03 | / | 0.4-0.5 | 0.40 |
| CB74-04 | / | 0.5-0.7 | 0.30 | |
| CB74-05 | / | 0.7-0.9 | 0.20 | |
| General tungsten carbide powder | CB74-06 | / | 0.9-1.1 | 0.20 |
| CB74-07 | / | 1.1-1.5 | 0.12 | |
| CB74-08 | / | 1.5-1.8 | 0.1 | |
| CB74-09 | / | 1.8-2.2 | 0.08 | |
| CB74-10 | / | 2.2-2.7 | 0.07 | |
| CB74-11 | / | 2.7-3.2 | 0.06 | |
| CB74-12 | / | 3.2-3.7 | 0.05 | |
| CB74-13 | / | 3.7-4.3 | 0.05 | |
| CB74-14 | / | 4.3-4.8 | 0.05 | |
| CB74-15 | / | 4.8-5.3 | 0.04 | |
| CB74-16 | / | 5.3-6.0 | 0.04 | |
| CB74-17 | / | 6.0-6.5 | 0.04 | |
| CB74-18 | / | 6.5-7.0 | 0.04 | |
| CB74-19 | / | 7.0-9.0 | 0.04 | |
| Coarse tungsten carbide powder | CB74-20 | / | 9.0-11.0 | 0.04 |
| CB74-21 | / | 11.0-13.0 | 0.04 | |
| CB74-22 | / | 13.0-17.0 | 0.04 | |
| CB74-23 | / | 17.0-25.0 | 0.04 | |
| CB74-24 | / | 25.0-35.0 | 0.04 | |
| CB74-25 | / | 35.0-45.0 | 0.04 | |
| CB74-26 | / | 45.0-55.0 | 0.04 |
Chemical Components %
| Impurity | Content (PPM) |
| Al | 10 |
| Fe | 50 |
| S | 10 |
| As | 10 |
| P | 10 |
| Mo | 20 |
| Ca | 15 |
| Mg | 10 |
| K | 20 |
| Na | 20 |
| Si | 10 |
| Cu | 5 |
| Mn | 10 |
| Ni | 30 |
| Pb | 5 |
| Bi | 5 |
| Sn | 10 |
| Sb | 10 |
| V | 10 |
| Ti | 10 |
| Cr | 30 |
| Co | 60 |
- Cutting tools for machining
- Ammunition
- Nuclear
- Sports
- Surgical instruments
- Jewelry
Our tungsten carbide powder is clearly tagged and labeled externally to ensure efficient identification and quality control. Great care is taken to avoid any damage which might be caused during storage or transportation.
CA0141 Tungsten Carbide Drill (WC Drill)
TS1350 Tungsten Carbide/Cobalt Powder (WC/Co Powder)
WM1106 Casting Tungsten Carbide Powder (Casting WC Powder)
CA1105 Macro Tungsten Carbide Powder (Macro WC Powder)
CA0139 Cemented Tungsten Carbide Rod (WC Rod)
CA0142 Tungsten Carbide Cutter & Tip (WC Cutter &Tip)
TS1351 Tungsten Carbide/Nickel/Chromium Powder (WC/Ni/Cr)
